Eli Vanes

elivanes

The Best spin wing on the Market endorsed by GB Internationals

The vanes are made of a laminated plastic material, with a different thickness depending on the profile, and permanently bent with an helicoidal shape, to rapidly stabilize the arrow flight in archery.

The stabilizing effect is determined by the special shape of the profiles, by its plastic material, but mostly by the kind of helicoidal shape that is used to permanently bend the vane.

The specificity of the shapes, together with the helicoidal bending of the vane, determine a series of benefits in terms of arrow performance, as:

  • Higher rotation on its axis
  • Higher conduct of the airflows that the arrow finds during its flight. This determines a higher stability during the flight.
  • Higher resistance to deviations, with respect to the estimated trajectory, that may be caused by atmospheric agents (wind/air).

All this thanks to a smaller exposed area. The benefits of using Elivanesʼ vanes are reached thanks to all the intrinsic features (typology/thickness) of the material used. At the beginning of the flight it will be forced, thanks to the aerodynamic prodding (that is proportional to the air speed, statistically considered motionless) exerted on the surfaces that are gradually bent. This will make the vanes open, trying to reach a flat shape but, at the same time, without losing its shape, that has been especially studied to stabilize within a certain amount of time. In particular, the improvement of the functional characteristics of the Elivanes vanes is represented by the helicoidal shape that the vanes acquire after the hot-shaping process, that makes them better performing than any other kind of vane used in archery.

To ensure a high placement stability, the ends of all our models are extended. This way they can be fixed with some special tape without modifying the vanes shape and the arrows flight dynamics. We are very glad to introduce you Our EliVanes ! Vanes with the -S- profile Especially designed for 3D and H+F S1 The very low profile and the small surface make this vane suitable for high level compound archers who shoot with a high draw weight.

S2 Especially designed for recurve and barebow archers with a good technique, or for compound archers who want an easily manageable vane.

S3 This profile is suitable for recurve and barebow archers. It has proven excellent on small shafts (ACE or similar shafts). Colour available: Light Blue - Yellow - Green - Red - Magenta (50 pieces per bag)

Vanes with the -P- profile (50 pieces per bag) Especially designed for FITA Round and 70m Round

P1 The very low profile and the small surface make this vane suitable for high level compound archers.

P2 Especially designed for compound archers with a good technique, or for those who want an easily manageable vane.

P3 This profile is suitable for archers of every division (recurve, compound and barebow). If it is applied with a slight tilt angle it can be used even for the indoor season.

Vanes with the -S- profile Especially designed for 3D and H+FS1 (50 pieces per bag) The very low profile and the small surface make this vane suitable for high level compound archers who shoot with a high draw weight.

S2 Especially designed for recurve and barebow archers with a good technique, or for compound archers who want an easily manageable vane.

S3 This profile is suitable for recurve and barebow archers. It has proven excellent on small shafts (ACE or similar shafts) Indoor Vanes ‐ “I” Series (36 pieces per bag) Especially designed for large diameter shafts. This vanes can also be applied with a slight tilt angle, in order to increase the stabilizing effect.

IS3 This vane is recommended for recurve and barebow archers, but even compound archers with a reflex riser and reduced brace height.

IS4 This vane has especially been designed for recurve and compound archers.

IP3 This profile is suitable for recurve and barebow archers who prefer smaller diameter shafts.